本文目录一览：
qq强制聊天代码原理
1.QQ强制聊天代码，把代码中的“********”星号换成想与其聊天的QQ号即可。
代码如下：;Uin=********amp;Site=ioshenmueMenu=yes
使用方法：把代码中星号换成想与其聊天的QQ号后复制到浏览器的地址栏处即可。无论他是否是好友，无须加好友就能给对方发QQ消息。
2.
第一步：在电脑桌面上点击右键，选择“新建”→“记事本”，然后在其中输入以下代码：
ON ERROR RESUME NEXT
Dim QQ_NUM
if Wscript.arguments.count1 then
QQ_NUM=InputBox(""vbCrvbCr"QQ强行聊天器"vbCrvbCr"","QQ强行聊天器VBS实现","输入你想要聊天的QQ号码，如：123456789")
if QQ_NUM="" then
Wscript_.quit
end if
else
VQQ_NUM = Wscript.arguments.Item(0)
end if
set ws=wscript.createobject("wscript.shell")
ws.run ";Uin="+QQ_NUM+"Site=ioshenmueMenu=yes",0
第二步：当输入完毕之后，点击“文件”，然后选择“另存为”，选择保存名字为“QQ强行聊天器VBS实现.vbs”（不外加引号）。保存类型为“所有文件”。这时在保存的地方双击打开这个文件，就可以在输入的对话框中输入任意QQ聊天了。前提是在本机上已经打开QQ了。
说明：上面是一段VBS代码具体意思如下：
ON ERROR RESUME NEXT 如果程序发生错误继续执行
Dim QQ_NUM 定义变量
inputbox 界面中默认显示内容，大家可以修改
对话框内容 if QQ_NUM="" then 检测用户的输入是否为空，如果为空
Wscript_.quit 退出脚本
3.tencent://Message/?Menu=YESUin=此处替换为您的qq号码websiteName=im.qq.com
把上面那个写入要聊天的QQ号,就是=和之间,那些字是没有的.然后复制到地址栏,确定就行了.不用打开任何网页.
4.tencent://Message/?Menu=YESUin=此处替换为自己的qq号码websiteName=im.qq.com
把上面那个写入你要聊天的QQ号,就是=和之间,那些字是没有的.然后复制到地址栏,确定就行了.不用打开任何网页.
5.有个小技巧,在地址栏输入 “ wpa.qq.com/msgrd?Uin=加明星的QQ号 ”就能和对方聊天啦!以上QQ大多数是加不上好友的!
qq聊天代码
josn 这种代码是不能发送，在直接发送文字的，您要用转换器来转换，然后点击转发才可以，所以这种东西一般情况是用key机器人来来转，你自己来转的话也不行，那你得下载那个QQ的那个机器人，直接去搜一下百度，然后搜索那个转q吧机器人就可以了，这个现在是免费的，但是代码的话，你也得自己去学，你不可能，我也不可能一下子说出一个家娃的语言，你也听不懂，对吧？，
一段QQ即时聊天的MFC代码
ShellExecute(NULL,"open","",NULL,NULL,SW_SHOWMAXIMIZED);
参数写错了
ShellExecute(NULL,"open","IEXPLORE",i,NULL,SW_SHOWMAXIMIZED); //调用IE,打开上面的地
IEXPLORE可以不要
默认为IE
参考MSDN吧
有关ShellExecute
ShellExecute Function
--------------------------------------------------------------------------------
Performs an operation on a specified file.
Syntax
HINSTANCE ShellExecute( HWND hwnd,
LPCTSTR lpOperation,
LPCTSTR lpFile,
LPCTSTR lpParameters,
LPCTSTR lpDirectory,
INT nShowCmd
);
Parameters
hwnd
[in] Handle to the owner window used for displaying a user interface (UI) or error messages. This value can be NULL if the operation is not associated with a window.
lpOperation
[in] Pointer to a null-terminated string, referred to in this case as a verb, that specifies the action to be performed. The set of available verbs depends on the particular file or folder. Generally, the actions available from an object's shortcut menu are available verbs. For more information about verbs and their availability, see Object Verbs. See Extending Shortcut Menus for further discussion of shortcut menus. The following verbs are commonly used.
edit
Launches an editor and opens the document for editing. If lpFile is not a document file, the function will fail.
explore
Explores the folder specified by lpFile.
find
Initiates a search starting from the specified directory.
open
Opens the file specified by the lpFile parameter. The file can be an executable file, a document file, or a folder.
Prints the document file specified by lpFile. If lpFile is not a document file, the function will fail.
NULL
For systems prior to Microsoft Windows 2000, the default verb is used if it is valid and available in the registry. If not, the "open" verb is used.
For Windows 2000 and later systems, the default verb is used if available. If not, the "open" verb is used. If neither verb is available, the system uses the first verb listed in the registry.
lpFile
[in] Pointer to a null-terminated string that specifies the file or object on which to execute the specified verb. To specify a Shell namespace object, pass the fully qualified parse name. Note that not all verbs are supported on all objects. For example, not all document types support the "print" verb.
lpParameters
[in] If the lpFile parameter specifies an executable file, lpParameters is a pointer to a null-terminated string that specifies the parameters to be passed to the application. The format of this string is determined by the verb that is to be invoked. If lpFile specifies a document file, lpParameters should be NULL.
lpDirectory
[in] Pointer to a null-terminated string that specifies the default directory.
nShowCmd
[in] Flags that specify how an application is to be displayed when it is opened. If lpFile specifies a document file, the flag is simply passed to the associated application. It is up to the application to decide how to handle it.
SW_HIDE
Hides the window and activates another window.
SW_MAXIMIZE
Maximizes the specified window.
SW_MINIMIZE
Minimizes the specified window and activates the next top-level window in the z-order.
SW_RESTORE
Activates and displays the window. If the window is minimized or maximized, Windows restores it to its original size and position. An application should specify this flag when restoring a minimized window.
SW_SHOW
Activates the window and displays it in its current size and position.
SW_SHOWDEFAULT
Sets the show state based on the SW_ flag specified in the STARTUPINFO structure passed to the CreateProcess function by the program that started the application. An application should call ShowWindow with this flag to set the initial show state of its main window.
SW_SHOWMAXIMIZED
Activates the window and displays it as a maximized window.
SW_SHOWMINIMIZED
Activates the window and displays it as a minimized window.
SW_SHOWMINNOACTIVE
Displays the window as a minimized window. The active window remains active.
SW_SHOWNA
Displays the window in its current state. The active window remains active.
SW_SHOWNOACTIVATE
Displays a window in its most recent size and position. The active window remains active.
SW_SHOWNORMAL
Activates and displays a window. If the window is minimized or maximized, Windows restores it to its original size and position. An application should specify this flag when displaying the window for the first time.
Return Value
Returns a value greater than 32 if successful, or an error value that is less than or equal to 32 otherwise. The following table lists the error values. The return value is cast as an HINSTANCE for backward compatibility with 16-bit Windows applications. It is not a true HINSTANCE, however. The only thing that can be done with the returned HINSTANCE is to cast it to an int and compare it with the value 32 or one of the error codes below.
0 The operating system is out of memory or resources.
ERROR_FILE_NOT_FOUND The specified file was not found.
ERROR_PATH_NOT_FOUND The specified path was not found.
ERROR_BAD_FORMAT The .exe file is invalid (non-Microsoft Win32 .exe or error in .exe image).
SE_ERR_ACCESSDENIED The operating system denied access to the specified file.
SE_ERR_ASSOCINCOMPLETE The file name association is incomplete or invalid.
SE_ERR_DDEBUSY The Dynamic Data Exchange (DDE) transaction could not be completed because other DDE transactions were being processed.
SE_ERR_DDEFAIL The DDE transaction failed.
SE_ERR_DDETIMEOUT The DDE transaction could not be completed because the request timed out.
SE_ERR_DLLNOTFOUND The specified dynamic-link library (DLL) was not found.
SE_ERR_FNF The specified file was not found.
SE_ERR_NOASSOC There is no application associated with the given file name extension. This error will also be returned if you attempt to print a file that is not printable.
SE_ERR_OOM There was not enough memory to complete the operation.
SE_ERR_PNF The specified path was not found.
SE_ERR_SHARE A sharing violation occurred.
Remarks
This method allows you to execute any commands in a folder's shortcut menu or stored in the registry.
To open a folder, use either of the following calls:
ShellExecute(handle, NULL, fully_qualified_path_to_folder, NULL, NULL, SW_SHOWNORMAL);
or
ShellExecute(handle, "open", fully_qualified_path_to_folder, NULL, NULL, SW_SHOWNORMAL);
To explore a folder, use:
ShellExecute(handle, "explore", fully_qualified_path_to_folder, NULL, NULL, SW_SHOWNORMAL);
To launch the Shell's Find utility for a directory, use:
ShellExecute(handle, "find", fully_qualified_path_to_folder, NULL, NULL, 0);
If lpOperation is NULL, the function opens the file specified by lpFile. If lpOperation is "open" or "explore", the function attempts to open or explore the folder.
To obtain information about the application that is launched as a result of calling ShellExecute, use ShellExecuteEx.
Note The Launch folder windows in a separate process setting in Folder Options affects ShellExecute. If that option is disabled (the default setting), ShellExecute uses an open Explorer window rather than launch a new one. If no Explorer window is open, ShellExecute launches a new one.
Windows 95/98/Me: ShellExecute is supported by the Microsoft Layer for Unicode. To use this, you must add certain files to your application, as outlined in Microsoft Layer for Unicode on Windows 95/98/Me Systems.
Function Information
Minimum DLL Version shell32.dll version 3.51 or later
Custom Implementation No
Header shellapi.h
Import library shell32.lib
Minimum operating systems Windows NT 3.1, Windows 95
Unicode Implemented as ANSI and Unicode versions.
See Also
IShellExecuteHook
--------------------------------------------------------------------------------
© 2005 Microsoft Corporation. All rights reserved.
有什么在QQ聊天中用的vbs整人代码？
On Error Resume Next
Dim wsh,ye
set wsh=createobject("wscript.shell")
for i=1 to 10
wscript.sleep 700
wsh.AppActivate("与 xx 聊天中")
wsh.sendKeys "^v"
wsh.sendKeys i
wsh.sendKeys "%s"
next
wscript.quit
跪求QQ的快捷聊天代码
1.Alt+S 快速回复
2.Alt+C 关闭当前窗口 Alt + F4也是关闭
3.Alt+H 打开聊天记录
4.Alt+T 更改消息模式
5.Ait+J 打开聊天纪录
6.Ctrl+A 全选当前对话框里的内容
7.Ctrl+F QQ里直接显示字体设置工具条
8.Ctrl+J 输入框里回车(跟回车一个效果)
9.Ctrl+M 输入框里回车(跟回车一个效果)
10.Ctrl+L 对输入框里当前行的文字左对齐
11.Ctrl+R 对输入框里当前行的文字右对齐
12.Ctrl+E 对输入框里当前行的文字居中
12.Ctrl+V 在qq对话框里实行粘贴
13.Ctrl+Z 清空/恢复输入框里的文字
14.Ctrl+～ 隐藏/显示.QQ于无形.（右下角托盘里也没了）
15.Ctrl+回车 快速回复 这个可能是聊QQ时最常用到的了
16.Ctrl+Alt+Z 快速提取消息（这个的快捷键可以自己设置QQ个人设置——系统设置——热键设置）17.Ctrl+Alt+A 捕捉屏幕
18.开始键 + D 全部最小化，显示桌面
如何用c语言编写QQ聊天程序（源代码）
1、首先，我们编写C语言的头文件#include stdio.h。
2、然后我们编写Main函数框架。
3、接下来我们定义两个变量，如下图所示。
4、然后我们编写输入的函数，如下图所示。
5、接下来在输入后，我们编写输出程序。
6、这时候，我们便可以观察最终结果。